Description
This is a stripped slide for your FN 509 pistol. You will need to supply all of your own internals from your factory FN 509 slide (see below), and you will need a barrel. All spaces in the slide accept factory FN components. For optimal performance, all Apex parts for the 509 fit this slide.
Slide Features
- Apex 5” Slide for the FN 509 Pistol
- Front and Rear Cocking Serrations
- 2 Options available: Classic or Lightning Bolt Serrations
- Suppressor height black on black sights installed by Apex
- Black PVD Finish
Ported Slide: Slide ports matching the Apex Ported Barrel for the FN 509 allow the escaping gases from the barrel ports to reduce muzzle rise. An Apex ported barrel is required for the ports to work correctly.
THIS SLIDE REQUIRES ALL INTERNALS AND A 5” BARREL FOR THE FN 509.
Options for Internals
- Use the factory parts from your present FN slide.
- Contact Apex Customer Service to order a Slide Completion Kit. We will fully assemble the slide for you prior to shipping. These Slide Completion Kits can only be purchased with a slide from Apex and must be installed by Apex.
- Purchase new Factory FN components from Midwestgunworks.com or Brownells.com.
Barrel Options
- Factory Barrel: Customers may use the factory 5” 509 barrel with this slide
- Apex Barrels:
- Apex Direct Drop-In Barrel for FN509 – 5.00 inch (105-073)
- Apex 9mm Drop-In Threaded Barrel for FN 509 – 5.00 inch (105-074)
- Apex 9mm Drop-in Ported Barrel for Apex FN 509 Ported Slides – 5.00 inch (Coming Soon)
Optic Mount Options
RMR Cut: Slide cut with the appropriate geometry to direct mount RMR footprint optics, including but not limited to: RMR, RMR-HD, SRO, Holosun 508 and other optics that utilize the RMR footprint. Check the specifications from your optic manufacturer for the proper torque on your screws. If no recommendations exist, we recommend all screws be torqued to 20 in-lb (Inch Pounds) MAXIMUM.</p
Reviews
There are no reviews yet.